Inon M67 Lens Holder W

产品型号:
456212143172
备注:
售价:
Member
HKD 575.00
数量:
   
 
加入购物车 直接结帐 + 加入愿望购物表
A lens holder attached on an Arm etc. to carry M67/28M67 series attachment lens. Compatible product is sandwiched between Lens Holder [screw] and Lens Holder [hole], or Lens Holder [screw] and Lens Holder Base of this product. The Lens Holder [hole] is usable as like "M67 Lens Holder for Float Arm" as well.
 
Weight:
When attached on single side
62g(2.2oz) [air] / approx.31g (1.1oz) [underwater]
 
When attached on both sides
106g (3.7oz) [air] / approx.60g (2.1oz) [underwater]
 
Compatible Arm/Base
Installed with Lens Holder [screw] and Lens Holder [hole]
Arm SS/S/M/L
YS Arm MS/M
 
Installed with Lens Holder [screw] and Lens Holder Base
Arm SS/S/M/L
YS Arm MS/M
Grip Base D4 (optional D Holder Extension Bar is necessary.)
Grip Base M1 (optional D Holder Extension Bar is necessary.)
D Holder (optional D Holder Extension Bar is necessary.)
Grip Base DIII w/ Rubber Grip D
Grip Base DII w/ Rubber Grip D
 
Installing Lens Holder [hole] by a screw
Float Arm S/M/ML
Mega Float Arm S/M
M5 Joint + Stick Arm SS-T/S-T/M-T/L
M5 Joint + Multi Ball Arm ML/L/LL/XL
Mega Float Tube S/M
INON
INON
Options   INON Arm System  
相关产品

1.产品收到後如有问题(购货七日内,非人为损坏)可提供退货更换服务,惟产品及包装要保证完好,不影响二次销售为原则,如需要更换,要碓保未经使用或下水,否则恕不接受更换或退货要求,产品本身品质问题除外。谢谢理解!

2.如非产品品质问题退货,或者由於卖家原因导致的退货问题,来回退货的运费由买家承担。

3.请您在收到产品後,一定当着快递员的面,拆开包装仔细验货,如有问题请第一时间与我方联系,以保证您的利益。恕不接受签收产品後以产品颜色、款式、配件不全等问题退换的要求,谢谢理解!

4.潜水服和BCD的尺码一般很难测量,如果您拿捏不准,可以谘询我们的客服,但是毕竟客服只能凭身高体重进行推荐,所以我们的推荐只是参考意见,最後的决定权在您,因尺码问题需要更换商品所产生的邮费自理。

5.凡是购买本店产品的顾客,请先谘询确定有没现货再拍,因为与实体店同时进行,存货每天都有所变动。

6.本店所售产品价格仅为网店销售价格,实体店价格会有时比网店高,但是如果您采用 PAYPAL 或支付宝付款,实体店取货也是可以的。

7.如果买家选择实体店铺自提,请在拍下时留言实体店铺自提,写上提货日期,提货人姓名以及联系方式。为保障双方利益,提货当日提货人需要凭本人有效证件提货(如护照或者港澳通行证) 微薄利润,仅赚人气,谢谢支持!

8. 其他条款请参阅"购物条款及细则"。